A Woman in Red

I photographed Leah last summer.  She is beautiful and gorgeous. As you see, she was wearing eye catching red dress. Since the color of her dress is intense pure red, I requested her to stand in front of old back wall. That brings good contrast between pail wall and her, and she is more standing out in the image.

Now, a photographer have to work a little bit harder on the computer.  I wanted to enhance my inner imagination of kind of Gothic, like Gotham city in Tim Burton version of Batman. So added rusty “yogoshi” weathering effect on entire image.

I would be glad if you see the mood I saw in my imagination.

Please click the idea to view larger image.

White crested waves and Long exposure

This images was taken in Abraham Lake, Alberta in this summer. I guess I arrived the area evening. The sun was already gone. Kootenay plains area is usually very windy. This day was also windy and the Abraham lake was white with form. Actually, this was the condition I had been waiting for. When attempting long exposure to white crested waves, the surface of lake or sea turns white, rather than black …kind of surreal. I used LEE Bigstopper and achieved 362 sec (6 min) of exposure time.

By the way, I recently discovered Capture one, excellent Raw converter and photo management software. I have being using Adobe Lightroom for long time. When opening Raw file to Photoshop from Lightroom I noticed many color spots of long-exposure noise was quite visible. On the other hand, the file from Capture one is cleaner. I could see some tiny white spots but they are not so significant. One day, I would to write a more thorough report.

Black and White conversion to the image “Island” (3) – Technique from wet darkroom

In my last blog, each parts of the image were looked after　and vignetting was applied. It is getting close to what I imagined. But I felt the island, the woods at the center, was somewhat still weak as a main subject. So I need to spice up a little bit. I used “Curve” layers to modify contrast and brightness. But it did not give delicate control over the intricate patterns of the woods. So I used a different technique.

Before showing the process, please allow me to talk about a little bit about conventional dark room process. In darkroom processing, can contrast be adjusted LOCALLY, like I did in my previous post? Originally, contrast was determined by a GRADE of the paper (#1 to 5, #1 is lowest contrast and #5 is highest) so the contrast can’t be adjusted locally. Then Multigrade paper was developed. With the MG paper, contrast was determined by different density of filters, placed between enlarging lens and the paper. The darker filter, the more contrast. By applying different density of the filter to particular part of the image, contrast can be adjusted locally. This is same as I have done in my previous post. As a more advanced technique, different densities of filters are applied to the SAME part. The principle of enlargement is same as shooting with a camera. It requires certain exposure time; it is just longer than shooting. Now please imagine you need 30sec to get proper exposure to a particular part of the image. With a moderate contrast filter, you get a result with lack of punch. Now, you need more contrast but you don’t want to lose gradation of the tone. So what you can do is divide the exposure time (30 sec) to different filters. E.g, High contrast filter for 8sec, medium one for 15 sec and low contrast one for 7 sec to preserve the gradation. I use this technique for the wood part in digital processing.

Step 1. Create a mask on the woods as precise as possible.

 Step 2. Create a Curve layer for high contrast. Please take a look a curve and the image below.

Step 3.  Create a Curve layer for low contrast.    

Step 4. Change opacity of the each curve layer. The high contrast curve adds edges of lines but it will sacrifice tonal gradation. The low contrast will recover the tonal gradation. I find this technique is effective to clouds or hair.

It is done. I saw bluish toning would suit this image so I added selenium toning by Nik SilverEfex. This is finally competed image.

Related posts:

• Black and white photo – “Island”
• Black and White conversion to the image “Island” (1)
• Black and White conversion to the image “Island” (2)

 

Black and White conversion to the image “Island” (2)

In the last post, my photo, “Island” was converted to B&W by B&W conversion software, TrueGrain. This time, I will share how I edited the converted image. As I mentioned in the previous post, my inner vision I imagined was that the woods at the center was floating in the air, like floating Island. Now I have to make changes to achieve the concept.

At first, short grasses are growing around the island. I brightened this area to separate from the outer part (photo 1).  By the way, I used “Curve” layers of Photoshop for this type of changes.

Photo 1

Next, I looked at the forest at the other side of the river. The forest on right side of the island is brighter than left one so I darken the right side to make even (photo 2). It is a subtle change.

photo 2

Then although the river is visible, it is too white and not noticeable. So I darkened the river (photo 3).

Although the Island is main subject (center of interest) in this photo, the summits of the mountains are also an important element since they are acting as a complement of the main subject. So I wanted to enhance the edge (snow line) of the mountains. In this case, the brightness of the snow line was kept at same level, and the rocky aprt around the snow line was darkened (photo 4). It is subtle change but it is significant on print.

photo 4

 Lastly, a tree was too white so it was darkened.

Let’s leave dodging and burning process at this point and see what will happen if I apply vignetting (Darkening or whiting corners). Before this process, I usually crop an image to appropriate composition and aspect ratio. For portrait works, I often use automatic vignetting tool equipped in Adobe Lightroom or Nik Color efex. But for landscapes, especially this case, I manually added vinetting. This is the original just after cropped.

1.       Left bottom corner.

2.       Right bottom corner.

3.       Right top corner.

4.       I felt still not quite effective, so I darkened about 1/12 of the entire image from top edge.

5.       I see texture on a mountain on the left side. I Do Not want to see the detail. So the area was whitened.

6.       More vinetting on right top corner.

7.       Then mild vignetting was applied at all corners by Nik Color Efex to add retro mood.

8.       Still I did not see the impact of my inner vision so I added gradual neutral density digitally to darken the sky. Vignetting looks okay now. This is the result.

Hmmm…it is getting closer but I still the Island is not standing out as I imagine.

So I tried another trick. It will be next time.  Stay Tuned.

Related posts

• Black and white photo – “Island”
• Black and White conversion to the image “Island” (1)

Black and White conversion to the image “Island” (1)

As I mentioned in my previous blog, I will share how I edited the black and white photo, “Island” posted in the previous blog.  First of all, I should talk about B&W conversion software I am using. Many photographers use software to convert a color image to monochrome image. It is very convenient since the software allows adding an effect of the color filter, (such as red filter for darkening sky or green filter for pleasant skin tone), mimicking many different types of B&W film, controlling grain level and adding toning such as sepia or selenium. Currently, I am using following three B&W converters.

• Nik software Silver efex Pro
• Topaz Labs B&W effects
• Grubba Software TrueGrain

Nik Silver Efex is the most popular B&W converter. It has many functions and some parameters can be locally adjusted by NIk’s famous “control points” method. Many types of film are listed for film mimicking. But I see “digital flavor” still remains. I would say It gives contemporary B&W image so I use the Silver Efex predominantly for my portrait works.

Topaz B&W effect doesn’t have film mimicking but is has many fancy toning so I occasionally use the software for toning at the end of process.

TrueGrain is very simple B&W converter; only I can do with the software are selecting a film type, adding an effect of the color filter, and controlling grain level. It allows modifying characteristic contrast curve of the selected film. It doesn’t have local adjustment or toning. Possibly, this is why nobody use (or knows) this software. But its film mimicking is very close to real film; it gives a kind of Lo-fi feel of the film. I use TrueGrain for my landscape photography since I would like keep natural feel to the images.

The original image was taken in foggy morning so the contrast of the entire image is somewhat low for B&W image.  I tried the B&W conversion with TrueGrain and I applied red filter but the sky is not dark enough and the “Island”, woods in the center of image was not standing out well. (photo 1)

Photo 1

So I had to apply some preparation to the color image before the conversion. Now I should explain how the color filter works for B&W photography. When a color is mixed with a particular different color, the mixed color will be black (or white but ignore at this point). This is called complementary color. For example, the complementary color of blue is yellow; that is why a yellow filter darkens the sky. On the other hand, when the same color of the filter exists in an image, that part will be brightened. I use this idea to enhance certain parts of the image. This time, I planned using orange filter, complementary color of the orange is between blue and cyan.

First of all, I needed to darken the sky. So I have to select (mask) the sky and change its color to more blue / cyan (photo 2). Please click the image for larger view.

Photo 2

Next, I wanted to add a little more contrast to the trees in the island to enhance the drama and separate the island from its surroundings. Again I applied mask to the trees (Photo 3). Then the color of the trees were change to blue/cyan but the intensity of the change was not as high as the sky since I expected a little more subtle changes of the contrast (photo 4)

Photo 3

Photo 4

At the same time, I felt trunks of the trees needed to be more distinctive, so orange (yellow and red) was added the trunks to lighten them (Photo 4).

Photo 5

Lastly, I brightened the whole island by “Curves” (photo 5).

Now all preparation is done. Save the file as Tiff and convert the image with TrueGrain. I chose Ilford HP5 as film mimicking and applied orange filter. I added grain as well.

So this is the result. Please compare to the photo 1. Now the B&W image has more contrast and drama. Getting closer to the concept when I shot the image at the scene.

Actually, this is not done; real cooking will be done on the B&W image. It will be shared in the next post. Stay tuned.

Related post: Black and white photo – “Island”

Gentle Beast – Beautiful Horses

Some of the readers here may have already known my project this year which is photographing my friend’s horses. They are so gentle and friendly so specific techniques are not required to photograph horses. But I realized that I have to pay attention some aspects capture their beauty and intimacy. Even a horse turns his head only a couple of inches further; his handsome face will be lost. I had to visit the ranch several times and learn a lot. Just recently, I feel I have become able to capture some good images from a visit.

I want to capture some dynamic action shots, but also I really like to see their friendship and affection.

This photo will be exhibited at my next solo gallery show in February. Stay Tuned.

Related Article: Animal Portrait – horses – Such a gentle animal

Portraits in Winter (3) – please participate in an experiment.

I talked about how I progress creative vision through development of one photo last time. Contrarily to the previous post, I occasionally have fully concrete idea before clicking shutter. This image is one of this type of cases.  I found a nice shadow of a tree on the wall of barn while I was hunting locations for the session. I imagined graphic contrast between the dark spooky shadow and beautiful Jillian. Also her shoulder line is straight and squire but this si I wanted rather than typical feminine pose since I imagined strength from her in oppressive mood. But there was problem which was messy ground  with a patch of snow and nasty weeds.  So I got an idea to add some digital effectｓ on the bottom of the frame.

Before asking you a favor, here is my thought. What is a fear artists or even creators worry about? It must be a question, “Will my work be accepted?”. That is proven by many episodes left by novelists, artists, and musicians, like scandalous failure of the Premiere of Stravinsky’s Rite of Spring in 1913. Or the shortest letter by Victor Hugo.  Although spending hours or even days facing a computer monitor to process one image, there is no guarantee people will like what I have done on the photo. First of all, if client does not like the image, all efforts I made are pointless. Then nothing must be happier, as an artist, than when the image is able to communicate with many people successfully.

Now I need your favor. Please participate in an experiment. I think most of readers here are photographers, but please forget critiquing and imagine your non-photographer in following situations.

1. YOU ARE THE MODEL and my client. I phoned you and let you know your photos are ready. I presented the images below as first time.  Which photo pleases you most? Why?
2. YOU ARE VISITING THE MODEL’S HOME and found these photos hang on the wall in her dining room. Which Image would make you feel WOW? Why?

Did you pick the same photo for these different situations? Or you think your impression may be different from other viewers?

Portraits in Winter (1)

I was supposed to post the images from the flood but I would like to process film first. I have to make time for it. So this time, I post images from the photo session I had in winter.

I had an opportunity to photograph beautiful Jillian in December, then I asked her another session in January since I really wanted try all photographic ideas I planned with this beautiful model. We traveled several locations from downtown to Englewood area Calgary. There was old barn with white wall in Englewood. Here are 3 photos from the white barn.

Just sunset time…it was quite warm afternoon as December. It was perfect light. I did not WANT to use any flashes.

Actually, it was not snowing. I added some effect. It looks chilly, doesn’t it? I call this image “snow white”

After the sun disappeared, temperature suddenly dropped and it became pretty cold. So I imagined a scene that a girl was waiting somebody in cold outside. Jillian responded well to my request. Don’t you feel the loneliness?

Please click the images for larger sizes.

Leya with her camera

As I mentioned in my last post, this purpose of this photo session was taking Leya’s portraits for her to use the photos for her photographic bissiness. She is stunning photographer, so why not asking her to pause with her camera.

Untitled by Hiroaki Kobayashi

In my last blog post, I shared an photo which I tried something creative in the camera at the location. This time, I tried digitally in my computer. The wall was a kind of bold and white part 0ccupied the frame to muach so I added some texture and color to the wall. Also the image was a little too sharp so I added soft-focus effect by the same technique applied to the wall.

Please click the images for larger size.

Related post: Leya in her attic

Couple portrait – a little spice to the photo

One more photo from the couple-portrait session which I talked in my previous blog post. This photo was taken in a little foot-tunnel in a park, and I like this location since I can try many funky photographic ideas. This time I lit the wall of the corrugated tunnel with pink gel. I believe I did not direct them to pose; the couple posed spontaneously. A client said my style was more like a movie director. Yes, I would like my clients to experience to be actors.  I love clients bring up ideas and create images together.

I think this image is completed as it is and I gave this version to them originally. She looks so strong, almost goddess-like, and he is watching over their new baby gently . But when I came back this image after months, I felt I need to spice up the entire image to enhance the impression I got in it. So this is the new version.

Please click the image for larger size. I am very sure my imagination is expanding  both at locations with my camera and at home on my computer, compared to even just one year ago. What I feel so lucky as an artist? It is when people enjoy a photo session and my art brings something to their lives (so satisfied work is not good enough to me).  In fact, I just like people.

By the way, now I am offering campagne. 15% discount for who booked portrait session and wedding by the end of January.  My contact infor is here

Related post: Couple portraits – Now I am posting because…